Configuring master switch
The master switch activates application control (sowing implement, sprayer) and activates display of the coverage map on the guidance map.
To configure the master switch:
- Select: Implement / Master switch.
Virtual
Master switch functionality from virtual master switch in Operations screen of console.
Refer to the implement controller manual for information on correct switch settings for the implement.
External console input
Master switch functionality from external switch (a control panel / physical master switch connected to console).
Note: If an external switch is connected, this configuration is usually set by the dealer during installation. The cable labelled 'Remote mapping' is connected to the wiring loom of the console and provides the power feed to activate/deactivate the coverage map and the master switch input.
AU1 External ECU
Master switch functionality from external switch (a control panel / physical master switch connected to ASC- 10 ECU).